Flutterby Beanie Crochet Pattern

If you love stripped beanie then the Flutterby Beanie is must to make.  You can work this beanie with two colors or three of as many or as few as you want.  This beanie is also a beautiful textured beanie that is fabulous for both boys and girls. This beanie use simple crochet stitches to work up this gorgeous beanie, so if you know basic crochet stitches then you will be able to whip up the Flutterby Beanie for anyone from newborn to adult and customize the beanie in any color scheme that you love!

Disclaimer: This post contains affiliate links.

Grab you hook and get ready to get hooked on the Flutterby Beanie!

Beanies that I Love!!

1.  Vintage Ripple Beanie   2. Morgan Beanie   3. Jelly Bean Beanie

The Flutterby Beanie Crochet Pattern can be found in my pattern store as an ad free and beautifully formatted PDF.

[ecwid_product id="148886109" display="picture title price options addtobag" version="2" show_border="1" show_price_on_button="1" center_align="1"]

• PIN the pattern to save for later on your Pinterest Boards Here!

Sizing

• Gauge: 12 Stitches and 10 Rows = 4”x4” (hdc)
• These measurements are approximated, measure head to get accurate sizing needed.

Pattern Key

• St/Sts: Stitch(es)
• Sl St: Slip Stitch
• Ch: Chain
• Sc: Single Crochet
• Hdc: Half Double Crochet
• Dc: Double Crochet

Notes

• Chain 1 will NOT count as a stitch.
• Joining: When ending the rounds, you will join with a slip stitch into the 1^st stitch (not the chain 1).
• In the sample, the color changes begin after the increases finish. For example Round 6 for 0-3 months.

ALL SIZES: (0-3M, 3-6M, 6-12M, 1-2Y, 3-10Y, Teen, Adult and Large Adult)

You Need Your K Hook and Your Color Choices of Yarn.

Start with Color 1 and Make a Magic Ring,

Round 1: Ch 1, 7 sc in loop, join with a sl st in the 1st sc, pull tight. - 7

Round 2: Ch 1, 1 hdc in same st, 2 hdc in each st around, end with 1 hdc in same st as ch 1, join. - 14

Round 3: Ch 1, 1 hdc in same st, 1 hdc in next st, *2 hdc in next st, 1 hdc in next st; repeat from*, end with 1 hdc in same st as ch 1, join. - 21

Round 4: Ch 1, 1 hdc in same st, 1 hdc in next 2 sts, *2 hdc in next st, 1 hdc in next 2 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 28

Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35

CONTINUE TO THE SECTION OF THE SIZE YOU ARE MAKING

0-3 Months: (Circumference 13-14” and Height 5 - 5.5”)

Change to color 2 and begin alternating colors every round.

Round 6: Ch 1, 1 dc in same st, 1 dc in next st and each st around, join. - 35

Round 7: Ch 1, 1 dc in same st, *1 sl st next st, 1 dc in next st; repeat from*, join. - 35

Repeat Rounds 6 & 7 until the beanie measures 5 inches tall for newborn or 5.5 inches tall for 1-3 months, ending on Round 7.  Fasten off and weave in any loose ends.

3-6 Months: (Circumference 15-16” and Height 6”)

Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 7 sts, *2 hdc in next st, 1 hdc in next 8 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 39

Change to color 2 and begin alternating colors every round.

Round 7: Ch 1, 1 dc in same st, 1 dc in next st and each st around, join. - 39

Round 8: Ch 1, 1 dc in same st, *1 sl st next st, 1 dc in next st; repeat from*, join. - 39

Repeat Rounds 7 & 8 until the beanie measures 6 inches tall, ending on Round 8.  Fasten off and weave in any loose ends.

6-12 Months: (Circumference 16-18” and Height 6.5”)

Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, join. - 41

Change to color 2 and begin alternating colors every round.

Round 7: Ch 1, 1 dc in same st, 1 dc in next st and each st around, join. - 41

Round 8: Ch 1, 1 dc in same st, *1 sl st next st, 1 dc in next st; repeat from*, join. - 41

Repeat Rounds 7 & 8 until the beanie measures 6.5 inches tall, ending on Round 8.  Fasten off and weave in any loose ends.

[ecwid_product id="148886109" display="picture title price options addtobag" version="2" show_border="1" show_price_on_button="1" center_align="1"]

1-2 Years: (Circumference 18-20” and Height 7”) 

Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42

Round 7: Ch 1, 1 hdc in same st, 1 hdc next st, *2 hdc in next st, 1 hdc in next 19 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 45

Change to color 2 and begin alternating colors every round.

Round 8: Ch 1, 1 dc in same st, 1 dc in next st and each st around, join. - 45

Round 9: Ch 1, 1 dc in same st, *1 sl st next st, 1 dc in next st; repeat from*, join. - 45

Repeat Rounds 8 & 9 until the beanie measures 7 inches tall, ending on Round 9.  Fasten off and weave in any loose ends.

3-10 Years: (Circumference 19-20” and Height 7.5”) 

Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42

Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49

Change to color 2 and begin alternating colors every round.

Round 8: Ch 1, 1 dc in same st, 1 dc in next st and each st around, join. - 49

Round 9: Ch 1, 1 dc in same st, *1 sl st next st, 1 dc in next st; repeat from*, join. - 49

Repeat Rounds 8 & 9 until the beanie measures 7.5 inches tall, ending on Round 9.  Fasten off and weave in any loose ends.

Teen, Adult and Large Adult: (Circumference 22-23” and Height 7.5” Teen, 8” Adult and 8.5” Large Adult) 

Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42

Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49

Round 8: Ch 1, 1 hdc in same st, 1 hdc in next 6 sts, *2 hdc in next st, 1 hdc in next 6 sts; repeat from*, join. - 55

Change to color 2 and begin alternating colors every round.

Round 9: Ch 1, 1 dc in same st, 1 dc in next st and each st around, join. - 55

Round 10: Ch 1, 1 dc in same st, *1 sl st next st, 1 dc in next st; repeat from*, join. - 55

Repeat Rounds 9 & 10 until the beanie measures 7.5 inches tall for teen, 8 inches tall for adult or 8.5 inches tall for large adult, ending on Round 10.  Fasten off and weave in any loose ends.

• PIN the pattern to save for later on your Pinterest Boards Here!

Need more inspiration?

A fun textured blanket to make is the Oliver Blanket!  This blanket can be customized any way you like!

~Ashley