The Glamour Beanie is a fun sparkly beanie, which of course is glamorous! For this beanie I used a sparkly yarn to give it that like extra sparkle, but you could work up this beanie in any color scheme for anyone to wear. This beanie is worked up with simple crochet stitches and one advanced crochet stitch, the extended half double crochet stitch, but don't worry, I will explain how to work that stitch.
Disclaimer: This post contains affiliate links.
So get ready to get hooked on the Glamour Beanie!
Beanies that I Love!!
1. Vintage Ripple Beanie 2. Morgan Beanie 3. Jelly Bean Beanie
The Glamour Beanie Crochet Pattern can be found in my pattern store as an ad free and beautifully formatted PDF.
- Get the ad-free, beautifully formatted, printable PDF from Ravelry.
- PIN the pattern to save for later on your Pinterest Boards Here!
Materials
- Yarn: Medium, Weight 4; Your Two Color Choices. Example made I Love This Yarn(Razzleberry Sparkle & Ivory)
- Hook: K (6.50mm)
- Tapestry Needle, Scissors and Measuring Tape
Sizing
- Gauge: 12 Stitches and 10 Rows = 4”x4” (hdc)
- These measurements are approximated, measure head to get accurate sizing needed.
Pattern Key
- St/Sts: Stitch(es)
- Sl St: Slip Stitch
- Ch: Chain
- Sc: Single Crochet
- Hdc: Half Double Crochet
Special Stitches:
- EXHDC (Extended Half Double Crochet): Yarn over, insert hook into stitch, yarn over and pull up a loop, yarn over and pull through 1 loop, yarn over and pull yarn through all 3 loops.
Notes
- Chain 1 will NOT count as a stitch.
- Joining: When ending the rounds, you will join with a slip stitch into the 1st stitch (not the chain 1).
Glamour Beanie Crochet Pattern
ALL SIZES: (0-3M, 3-6M, 6-12M, 1-2Y, 3-10Y, Teen, Adult and Large Adult)
You Need Your K Hook and Your Two Color Choices of Yarn.
Start with Color 1, Make a Magic Ring,
Round 1: Ch 1, 7 sc in loop, join with a sl st in the 1st sc, pull tight. - 7
Round 2: Ch 1, 1 hdc in same st, 2 hdc in each st around, end with 1 hdc in same st as ch 1, join. - 14
Round 3: Ch 1, 1 hdc in same st, 1 hdc in next st, *2 hdc in next st, 1 hdc in next st; repeat from*, end with 1 hdc in same st as ch 1, join. - 21
Round 4: Ch 1, 1 hdc in same st, 1 hdc in next 2 sts, *2 hdc in next st, 1 hdc in next 2 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 28
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35
CONTINUE TO THE SECTION OF THE SIZE YOU ARE MAKING
0-3 Months: (Circumference 13-14” and Height 5 - 5.5”)
Round 6: Ch 1, 1 exhdc in same st, 1 exhdc in next st and each st around, join. - 35
Repeat Round 6 until the beanie measures 4 inches tall for a newborn or 4.5 inches tall for a 1-3 months, then continue to brim.
Brim: Rounds 1 &2 (Color 2): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 35
Round 3 (Color 1): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 35. Fasten off and weave in any loose ends.
3-6 Months: (Circumference 15-16” and Height 6”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 7 sts, *2 hdc in next st, 1 hdc in next 8 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 39
Round 7: Ch 1, 1 exhdc in same st, 1 exhdc in next st and each st around, join. - 39
Repeat Round 7 until the beanie measures 5 inches tall, then continue to brim.
Brim: Rounds 1 & 2 (Color 2): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 39
Round 3 (Color 1): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 39 Fasten off and weave in any loose ends.
6-12 Months: (Circumference 16-18” and Height 6.5”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 exhdc in same st, 1 exhdc in next st and each st around, join. - 42
Repeat Round 7 until the beanie measures 5.5 inches tall, then continue to brim.
Brim: Rounds 1 & 2 (Color 2): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 42
Round 3 (Color 1): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 42 Fasten off and weave in any loose ends.
1-2 Years: (Circumference 18-20” and Height 7”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc next st, *2 hdc in next st, 1 hdc in next 19 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 45
Round 8: Ch 1, 1 exhdc in same st, 1 exhdc in next st and each st around, join. - 45
Repeat Round 8 until the beanie measures 6 inches tall, then continue to brim.
Brim: Rounds 1 & 2 (Color 2): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 45
Round 3 (Color 1): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 45 Fasten off and weave in any loose ends.
3-10 Years: (Circumference 19-20” and Height 7.5”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49
Round 8: Ch 1, 1 exhdc in same st, 1 exhdc in next st and each st around, join. - 49
Repeat Round 8 until the beanie measures 6.5 inches tall, then continue to brim.
Brim: Rounds 1 & 2 (Color 2): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 49
Round 3 (Color 1): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 49 Fasten off and weave in any loose ends.
Teen, Adult and Large Adult: (Circumference 22-23” and Height 7.5” Teen, 8” Adult and 8.5” Large Adult)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49
Round 5: Ch 1, 1 dc in same st, 1 dc in next 6 sts, *2 dc in next st, 1 dc in next 6 sts; repeat from*, end with 1 dc in same st as ch 1, join. - 56
Round 9: Ch 1, 1 exhdc in same st, 1 exhdc in next st and each st around, join. - 56
Repeat Round 9 until the beanie measures 6.5 inches tall for teen, 7 inches tall for adult or 7.5 inches tall for large adult, then continue to brim.
Brim: Rounds 1 & 2 (Color 2): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 56
Round 3 (Color 1): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 56 Fasten off and weave in any loose ends.
Need more inspiration?
A fun textured blanket to make is the Heidi Blanket! This blanket can be customized any way you like!
~Ashley
