
I am so excited to release the Lizzie Bear Beanie, I wanted something simple but with a little bit of a beautiful texture to be the official crochet pattern of the Lizzie Bear Project! Elizabeth is turning two on the 17th and I was originally designing this pattern for newborns but I wanted Elizabeth to have a Lizzie Bear Beanie to wear now. So the pattern includes sizes for all ages and because everybody needs to a bear! If you are making this beanie for the Lizzie Bear Project you will be able to whip up this pattern super quick!
Disclaimer: This post contains affiliate links.
Get ready to get hooked and creative with the Lizzie Bear Beanie!
Beanies that I Love!!
1. Vintage Ripple Beanie 2. Morgan Beanie 3. Jelly Bean Beanie
The Lizzie Bear Beanie Crochet Pattern can be found in my pattern store as an ad free and beautifully formatted PDF.
- Get the ad-free, beautifully formatted, printable PDF from Ravelry.
- PIN the pattern to save for later on your Pinterest Boards Here!
If you have a NICU story, I would love to hear your story! Comment below with your story and or share on social media and tag us with #LizzieBearProject
Come join the Lizzie Bear Project and Pledge to make 24 beanies in 24 days!
By signing up below, you will receive 4 bear beanie crochet patterns by August 17th
- Yarn: Medium, Weight 4; Your Color Choice. Sample is made with I Love This Yarn (Pink)
- Hook: K (6.50mm)
- Tapestry Needle, Scissors and Measuring Tape
Sizing
- Gauge: 12 Stitches and 10 Rows = 4”x4” (hdc)
- These measurements are approximated, measure head to get accurate sizing needed.
Size | Circumference | Height |
Newborn 1-3 Months 3-6 Months 6-12 Months 1-2 Years 3-10 Years Teen Adult Large Adult |
13-14” 13-14” 15-16” 16-18” 18-20” 19-20” 22-23” 22-23” 22-23” |
5” 5.5” 6” 6.5” 7” 7.5” 7.5” 8” 8.5” |
Pattern Key
- St/Sts: Stitch(es)
- Sl St: Slip Stitch
- Ch: Chain
- Sc: Single Crochet
- Hdc: Half Double Crochet
- Dc: Double Crochet
Special Stitches:
- FPDC (Front Post Double Crochet): Yarn over, insert hook under post of stitch, yarn over & pull up a loop, yarn over & pull through all 3 loops.
Notes
- Chain 1 will NOT count as a stitch.
- Joining: When ending the rounds, you will join with a slip stitch into the 1st stitch (not the chain 1).
[embed]https://youtu.be/qSIPmx7fVQ0[/embed]
ALL SIZES: (0-3M, 3-6M, 6-12M, 1-2Y, 3-10Y, Teen, Adult and Large Adult)
You Need Your K Hook and Your Color Choice of Yarn.
Make a Magic Ring,
Round 1: Ch 1, 7 sc in loop, join with a sl st in the 1st sc, pull tight. - 7
Round 2: Ch 1, 1 hdc in same st, 2 hdc in each st around, end with 1 hdc in same st as ch 1, join. - 14
Round 3: Ch 1, 1 hdc in same st, 1 hdc in next st, *2 hdc in next st, 1 hdc in next st; repeat from*, end with 1 hdc in same st as ch 1, join. - 21
Round 4: Ch 1, 1 hdc in same st, 1 hdc in next 2 sts, *2 hdc in next st, 1 hdc in next 2 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 28
CONTINUE TO THE SECTION OF THE SIZE YOU ARE MAKING
0-3 Months: (Circumference 13-14” and Height 5 - 5.5”)
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, join. - 34
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 34
Repeat Round 6 until the beanie measures 3.5 inches tall for newborn or 4 inches tall for 1-3 months, then continue to Ribbing.
Ribbing:
Round 1: Ch 1, 1 dc in same st, 1 fpdc in next st, *1 dc in next st, 1 fpdc in next st; repeat from*, join. - 34
Rounds 2 & 3: Repeat Round 1.
Round 4: Sl st in next st and each st around.
Fasten off and weave in any loose ends.
3-6 Months: (Circumference 15-16” and Height 6”)
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 7 sts, *2 hdc in next st, 1 hdc in next 8 sts; repeat from*, join. - 38
Round 7: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 38
Repeat Round 7 until the beanie measures 4.5 inches tall, then continue to Ribbing
Ribbing:
Round 1: Ch 1, 1 dc in same st, 1 fpdc in next st, *1 dc in next st, 1 fpdc in next st; repeat from*, join. - 38
Rounds 2 & 3: Repeat Round 1.
Round 4: Sl st in next st and each st around.
Fasten off and weave in any loose ends.
6-12 Months: (Circumference 16-18” and Height 6.5”)
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 42
Repeat Round 7 until the beanie measures 5 inches tall, then continue to Ribbing.
Ribbing:
Round 1: Ch 1, 1 dc in same st, 1 fpdc in next st, *1 dc in next st, 1 fpdc in next st; repeat from*, join. - 42
Rounds 2 & 3: Repeat Round 1.
Round 4: Sl st in next st and each st around.
Fasten off and weave in any loose ends.
1-2 Years: (Circumference 18-20” and Height 7”)
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc next st, *2 hdc in next st, 1 hdc in next 19 sts; repeat from*, join. - 44
Round 8: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 44
Repeat Round 8 until the beanie measures 5.5 inches tall, then continue to Ribbing.
Ribbing:
Round 1: Ch 1, 1 dc in same st, 1 fpdc in next st, *1 dc in next st, 1 fpdc in next st; repeat from*, join. - 44
Rounds 2 & 3: Repeat Round 1.
Round 4: Sl st in next st and each st around.
Fasten off and weave in any loose ends.
3-10 Years: (Circumference 19-20” and Height 7.5”)
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, join. - 48
Round 8: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 48
Repeat Round 8 until the beanie measures 6 inches tall, then continue to Ribbing.
Ribbing:
Round 1: Ch 1, 1 dc in same st, 1 fpdc in next st, *1 dc in next st, 1 fpdc in next st; repeat from*, join. - 48
Rounds 2 & 3: Repeat Round 1.
Round 4: Sl st in next st and each st around.
Fasten off and weave in any loose ends.
Teen, Adult and Large Adult: (Circumference 22-23” and Height 7.5” Teen, 8” Adult and 8.5” Large Adult)
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49
Round 8: Ch 1, 1 hdc in same st, 1 hdc in next 6 sts, *2 hdc in next st, 1 hdc in next 6 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 56
Round 9: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 56
Repeat Round 9 until the beanie measures 6 inches tall for teen, 6.5 inches tall for adult or 7 inches tall for large adult, then continue to Ribbing.
Ribbing:
Round 1: Ch 1, 1 dc in same st, 1 fpdc in next st, *1 dc in next st, 1 fpdc in next st; repeat from*, join. - 56
Repeat Round 1 until the beanie measures 7.5 inches tall for teen, 8 inches tall for adult or 8.5 inches tall for large adult. Fasten off and weave in any loose ends.
Bear Ears
You Need Your K Hook and Your Color Choice of Yarn.
Make a Magic Ring,
Round 1: Ch 1, 7 sc in loop, join with a sl st in the 1st sc, pull tight. - 7
Round 2: Ch 1, 1 hdc in same st, 2 hdc in each st around, end with 1 hdc in same st as ch 1, join. - 14
Round 3: Ch 1, 1 hdc in same st, 1 hdc in next st, *2 hdc in next st, 1 hdc in next st; repeat from*, end with 1 hdc in same st as ch 1, join. - 21
Fasten off and weave in any loose ends and then sew the ears along rounds 4-5 rounds of the beanie.
Need more inspiration?
A fun textured blanket to make is the Oliver Blanket! This blanket can be customized any way you like!
~Ashley