I love chevron designs and the Mini Chevron Beanie is a great chevron project with a little twist. The Mini Chevron Beanie isn't make with the traditional chevron look but if you look really close at the texture it does have a mini chevron. This beanie is is fun to make and you can get creative with any color scheme. This beanie uses simple crochet stitches with the exception of the half double crochet cluster, but don't worry I explain how to work the stitch within the pattern.
Disclaimer: This post contains affiliate links.
Get ready to get hooked and with the Mini Chevron Beanie!
Beanies that I Love!!
1. Vintage Ripple Beanie 2. Morgan Beanie 3. Jelly Bean Beanie
The Mini Chevron Beanie Crochet Pattern can be found in my pattern store as an ad free and beautifully formatted PDF.
- Get the ad-free, beautifully formatted, printable PDF from Ravelry.
- PIN the pattern to save for later on your Pinterest Boards Here!
Sizing
- Gauge: 12 Stitches and 10 Rows = 4”x4” (hdc)
- These measurements are approximated, measure head to get accurate sizing needed.
| Size | Circumference | Height |
|
Newborn 1-3 Months 3-6 Months 6-12 Months 1-2 Years 3-10 Years Teen Adult Large Adult |
13-14” 13-14” 15-16” 16-18” 18-20” 19-20” 22-23” 22-23” 22-23” |
5” 5.5” 6” 6.5” 7” 7.5” 7.5” 8” 8.5” |
Pattern Key
- St/Sts: Stitch(es)
- Sl St: Slip Stitch
- Ch: Chain
- Sc: Single Crochet
- Hdc: Half Double Crochet
Special Stitches:
- Hdc Cluster (Half Double Crochet Cluster): Yarn over, insert hook into stitch, yarn over and pull up a loop. Yarn over, insert hook into same stitch, yarn over and pull up a loop. Yarn over and pull through all 5 loops on hook.
Notes
- Chain 1 will NOT count as a stitch.
- Joining: When ending the rounds, you will join with a slip stitch into the 1st stitch (not the chain 1).
ALL SIZES: (0-3M, 3-6M, 6-12M, 1-2Y, 3-10Y, Teen, Adult and Large Adult)
You Need Your K Hook and Your Color Choices of Yarn.
With Color One Make a Magic Ring,
Round 1: Ch 1, 7 sc in loop, join with a sl st in the 1st sc, pull tight. - 7
Round 2: Ch 1, 1 hdc in same st, 2 hdc in each st around, end with 1 hdc in same st as ch 1, join. - 14
Round 3: Ch 1, 1 hdc in same st, 1 hdc in next st, *2 hdc in next st, 1 hdc in next st; repeat from*, end with 1 hdc in same st as ch 1, join. - 21
Round 4: Ch 1, 1 hdc in same st, 1 hdc in next 2 sts, *2 hdc in next st, 1 hdc in next 2 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 28
CONTINUE TO THE SECTION OF THE SIZE YOU ARE MAKING
0-3 Months: (Circumference 13-14” and Height 5 - 5.5”)
Round 5: Ch 1, 1 hdc in same st, *2 hdc in next st, 1 hdc in next 8 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 32
Round 7: Ch 1, 1 sc in same st, 1 sc in next 3 sts, 1 hdc cluster in next 4 sts, *1 sc in next 4 sts, 1 hdc cluster in next 4 sts; repeat from*, do NOT join. - 32
You are now working in continuous rounds, use a stitch marker to mark first stitch.
Round 8: With Color 2, *1 hdc cluster in next 4 sts, 1 sc in next 4 sts; repeat from*, do NOT join. - 32
Round 9: With Color 1, *1 sc in next 4 sts, 1 hdc cluster in next 4 sts; repeat from*, do NOT join. - 32
Repeat Rounds 8 & 9 until the beanie measures 4 ¾ inches tall for newborn or 5 ¼ for 1-3 months, then continue to brim.
Brim: Join, Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 32 sc
Fasten off and weave in any loose ends.
3-12 Months: (Circumference 15-16” and Height 6-6.5”)
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35
Round 6: Ch 1, 2 hdc in same st, 1 hdc in next 7 sts, *2 hdc in next st, 1 hdc in next 8 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 40
Round 7: Ch 1, 1 sc in same st, 1 sc in next 3 sts, 1 hdc cluster in next 4 sts, *1 sc in next 4 sts, 1 hdc cluster in next 4 sts; repeat from*, do NOT join. - 40
You are now working in continuous rounds, use a stitch marker to mark first stitch.
Round 8: With Color 2, *1 hdc cluster in next 4 sts, 1 sc in next 4 sts; repeat from*, do NOT join. - 40
Round 9: With Color 1, *1 sc in next 4 sts, 1 hdc cluster in next 4 sts; repeat from*, do
NOT join. - 40
Repeat Rounds 8 & 9 until the beanie measures 5 ¾ for 3-6 months or 6 ¼ for 6-12 months, then continue to brim.
Brim: Join, Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 40 sc
Fasten off and weave in any loose ends.
1-10 Years: (Circumference 18-20” and Height 7 - 7.5”)
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, join. - 48
Round 8: Ch 1, 1 sc in same st, 1 sc in next 3 sts, 1 hdc cluster in next 4 sts, *1 sc in next 4 sts, 1 hdc cluster in next 4 sts; repeat from*, do NOT join. - 48
You are now working in continuous rounds, use a stitch marker to mark first stitch.
Round 9: With Color 2, *1 hdc cluster in next 4 sts, 1 sc in next 4 sts; repeat from*, do
NOT join. - 48
Round 10: With Color 1, *1 sc in next 4 sts, 1 hdc cluster in next 4 sts; repeat from*, do NOT join. - 48
Repeat Rounds 9 & 10 until the beanie measures 6 ¾ for 1-2 years or 7 ½ for 3-10 years, then continue to brim.
Brim: Join, Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 48 sc
Fasten off and weave in any loose ends.
Teen, Adult and Large Adult: (Circumference 22-23” and Height 7.5” Teen, 8” Adult and 8.5” Large Adult)
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49
Round 8: Ch 1, 2 hdc in same st, 1 hdc in next 13 sts, *2 hdc in next st, 1 hdc in next 6 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 56
Round 9: Ch 1, 1 sc in same st, 1 sc in next 3 sts, 1 hdc cluster in next 4 sts, *1 sc in next 4 sts, 1 hdc cluster in next 4 sts; repeat from*, do NOT join. - 56
You are now working in continuous rounds, use a stitch marker to mark first stitch.
Round 10: With Color 2, *1 hdc cluster in next 4 sts, 1 sc in next 4 sts; repeat from*, do NOT join. - 56
Round 11: With Color 1, *1 sc in next 4 sts, 1 hdc cluster in next 4 sts; repeat from*, do NOT join. - 56
Repeat Rounds 10 & 11 until the beanie measures 7 ¼ inches tall for teen, 7 ¾ for adult or 7 ¾ for large adult, then continue to brim.
Brim: Join, Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 56 sc
Fasten off and weave in any loose ends.
Need more inspiration?
A fun textured blanket to make is the Oliver Blanket! This blanket can be customized any way you like!
~Ashley
