
The Noel Beanie is a beautiful textured beanie that is an adorable beanie in Christmas colors. This beanie looks adorable in other colors too but there is something about the red and green combination that screams yes! It creates an illusion like red ornaments of the green Christmas tree! This beanie uses simple crochet stitches with one advanced stitch, the side puff stitch, but don't worry I explain this stitch, it is super simple to work up to create the beautiful puff stitch.
Disclaimer: This post contains affiliate links.
Get ready to get hooked on the Noel Beanie, everyone will want to wear one at Christmas.
Beanies that I Love!!
1. Vintage Ripple Beanie 2. Morgan Beanie 3. Jelly Bean Beanie
The Noel Beanie Crochet Pattern can be found in my pattern store as an ad free and beautifully formatted PDF.
- Get the ad-free, beautifully formatted, printable PDF from Ravelry.
- PIN the pattern to save for later on your Pinterest Boards Here!
Materials
- Yarn: Medium, Weight 4; Your Color Choices. Sample is made with Vanna’s Choice (Scarlet & Kelly Green)
- Hook: K (6.50mm)
- Tapestry Needle, Scissors and Measuring Tape
Sizing
- Gauge: 12 Stitches and 10 Rows = 4”x4” (hdc)
- These measurements are approximated, measure head to get accurate sizing needed.
Size | Circumference | Height |
Newborn 1-3 Months 3-6 Months 6-12 Months 1-2 Years 3-10 Years Teen Adult Large Adult |
13-14” 13-14” 15-16” 16-18” 18-20” 19-20” 22-23” 22-23” 22-23” |
5” 5.5” 6” 6.5” 7” 7.5” 7.5” 8” 8.5” |
Pattern Key
- St/Sts: Stitch(es)
- Sl St: Slip Stitch
- Ch: Chain
- Sc: Single Crochet
- Hdc: Half Double Crochet
- Dc: Double Crochet
Special Stitch: Color Coded
- Side Puff: (Working around the post of the dc you just made) *Yarn over, pick up a loop around the post of the dc you just made; repeat*, 3 times, yarn over, draw through 6 loops on hook, yarn over draw through last 2 loops.
Notes
- Chain 1 will NOT count as a stitch.
- Joining: When ending the rounds, you will join with a slip stitch into the 1st stitch (not the chain 1).
ALL SIZES: (0-3M, 3-6M, 6-12M, 1-2Y, 3-10Y, Teen, Adult and Large Adult)
You Need Your K Hook and Your Two Color Choices of Yarn.
Start with Color 1 and Make a Magic Ring,
Round 1: Ch 1, 7 sc in loop, join with a sl st in the 1st sc, pull tight. - 7
Round 2: Ch 1, 1 hdc in same st, 2 hdc in each st around, end with 1 hdc in same st as ch 1, join. - 14
Round 3: Ch 1, 1 hdc in same st, 1 hdc in next st, *2 hdc in next st, 1 hdc in next st; repeat from*, end with 1 hdc in same st as ch 1, join. - 21
Round 4: Ch 1, 1 hdc in same st, 1 hdc in next 2 sts, *2 hdc in next st, 1 hdc in next 2 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 28
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35
CONTINUE TO THE SECTION OF THE SIZE YOU ARE MAKING
0-3 Months: (Circumference 13-14” and Height 5 - 5.5”)
Round 6: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 35
You will now alternate colors every round.
Round 7: Ch 1, 1 dc in same st, *skip 1 st, 1 dc in next st, side puff around the dc you just made; repeat*, join. - 35
Repeat Rounds 6 & 7 until the beanie measures 4 ¾ inches tall for newborn or 5 ¼ inches tall for 1-3 months, ending with Round 6.
Trim (Color 2): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 35
Fasten off and weave in any loose ends.
3-6 Months: (Circumference 15-16” and Height 6”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 7 sts, *2 hdc in next st, 1 hdc in next 8 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 39
Round 7: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 39
You will now alternate colors every round.
Round 8: Ch 1, 1 dc in same st, *skip 1 st, 1 dc in next st, side puff around the dc you just made; repeat*, join. - 39
Repeat Rounds 7 & 8 until the beanie measures 5 ¾ inches tall, ending with Round 7.
Trim (Color 2): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 39
Fasten off and weave in any loose ends.
6-12 Months: (Circumference 16-18” and Height 6.5”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 42
You will now alternate colors every round.
Round 8: Ch 1, 1 dc in same st, *skip 1 st, 1 dc in next st, side puff around the dc you just made; repeat*, join. - 42
Repeat Rounds 7 & 8 until the beanie measures 6 ¼ inches tall, ending with Round 7.
Trim (Color 2): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 42
Fasten off and weave in any loose ends.
1-2 Years: (Circumference 18-20” and Height 7”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc next st, *2 hdc in next st, 1 hdc in next 19 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 45
Round 8: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 45
You will now alternate colors every round.
Round 9: Ch 1, 1 dc in same st, *skip 1 st, 1 dc in next st, side puff around the dc you just made; repeat*, join. - 45
Repeat Rounds 8 & 9 until the beanie measures 6 ¾ inches tall, ending with Round 8.
Trim (Color 2): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 45
Fasten off and weave in any loose ends.
3-10 Years: (Circumference 19-20” and Height 7.5”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49
Round 8: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 49
You will now alternate colors every round.
Round 9: Ch 1, 1 dc in same st, *skip 1 st, 1 dc in next st, side puff around the dc you just made; repeat*, join. - 49
Repeat Rounds 8 & 9 until the beanie measures 7 ¼ inches tall, ending with Round 8.
Trim (Color 2): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 49
Fasten off and weave in any loose ends.
Teen, Adult and Large Adult: (Circumference 22-23” and Height 7.5” Teen, 8” Adult and 8.5” Large Adult)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49
Round 8: Ch 1, 1 hdc in same st, 1 hdc in next 6 sts, *2 hdc in next st, 1 hdc in next 6 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 56
Round 9: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 56
You will now alternate colors every round.
Round 10: Ch 1, 1 dc in same st, *skip 1 st, 1 dc in next st, side puff around the dc you just made; repeat*, join. - 56
Repeat Rounds 9 & 10 until the beanie measures 7 ¼ inches tall for teen, 7 ¾ inches tall for adult or 8 ¼ for large adult, ending with Round 9.
Trim (Color 2): Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 56
Fasten off and weave in any loose ends.
Need more inspiration?
A fun textured blanket to make is the Oliver Blanket! This blanket can be customized any way you like!
~Ashley