Pumpkin Beanie Crochet Pattern

Pumpkin Beanie Crochet Pattern

I am ready for nice cool weather and pumpkins everywhere and wearing an adorable Pumpkin Beanie is a plus! The Pumpkin Beanie is such a fun beanie to make and you can get as creative as you want. If you just want the textured beanie and adding a stump you can.  You can also add an adorable leaf or two and the don't forget the curly vine. If you have a little girl, you can always add an adorable flower with an alligator clip that can be attached and detached.  This beanie has an advanced stitch, which is the front post double crochet, but don't worry it is simple to work up. If you take your time, sewing on the pieces is simple and it is all worth it!

Disclaimer: This post contains affiliate links.


Get ready to get hooked and creative with the Pumpkin Beanie!

Beanies that I Love!!

1.  Vintage Ripple Beanie   2. Morgan Beanie   3. Jelly Bean Beanie

The Pumpkin Beanie Crochet Pattern can be found in my pattern store as an ad free and beautifully formatted PDF.

Materials

  • Yarn: Medium, Weight 4; Orange, Green and Taupe. Sample is made Vanna’s Choice (Goldfish, Fern & Lamb) & Loops and Threads Impeccable (Taupe)
  • Hooks: H (5.00mm) & K (6.50mm)
  • Tapestry Needle, Scissors and Measuring Tape
  • Optional: Fiber Fill
  • Alligator Clip (For Flower)

Sizing

  • Gauge: 12 Stitches and 10 Rows = 4”x4” (hdc)
  • These measurements are approximated, measure head to get accurate sizing needed.
Size Circumference Height

Newborn

1-3 Months

3-6 Months

6-12 Months

1-2 Years

3-10 Years

Teen

Adult

Large Adult

13-14”

13-14”

15-16”

16-18”

18-20”

19-20”

22-23”

22-23”

22-23”

5”

5.5”

6”

6.5”

7”

7.5”

7.5”

8”

8.5”

     

Pattern Key

  • St/Sts: Stitch(es)
  • Sl St: Slip Stitch
  • Ch: Chain
  • Sc: Single Crochet
  • Hdc: Half Double Crochet
  • Dc: Double Crochet

Special Stitches: 

  • FPHDC (Front Post Half Double Crochet): Yarn over, insert hook under post of stitch, yarn over & pull up a loop, yarn over & pull through all 3 loops.

Notes

  • Chain 1 will NOT count as a stitch.
  • Joining: When ending the rounds, you will join with a slip stitch into the 1st stitch (not the chain 1).



ALL SIZES: (0-3M, 3-6M, 6-12M, 1-2Y, 3-10Y, Teen, Adult and Large Adult) You Need Your K Hook and  Orange Yarn

Make a Magic Ring,

Round 1: Ch 1, 7 sc in loop, join with a sl st in the 1st sc, pull tight. - 7

Round 2: Ch 1, 1 hdc in same st, 2 hdc in each st around, end with 1 hdc in same st as ch 1, join. - 14

Round 3: Ch 1, 1 fphdc in same st, 1 hdc in next st, *1 hdc and 1 fphdc in next st, 1 hdc in next st; repeat from*, end with 1 hdc in same st as ch 1, join. - 21

Round 4: Ch 1, 1 fphdc in same st, 1 hdc in next 2 sts, *1 hdc and 1 fphdc in next st, 1 hdc in next 2 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 28

Round 5: Ch 1, 1 fphdc in same st, 1 hdc in next 3 sts, *1 hdc and 1 fphdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35

CONTINUE TO THE SECTION OF THE SIZE YOU ARE MAKING



0-3 Months: (Circumference 13-14” and Height 5 - 5.5”)

Round 6: Ch 1, 1 fphdc in same, 1 hdc in next 4 sts, *1 fphdc in next st, 1 hdc in next 4

sts; repeat from*, join. - 35

Repeat Round 6 until the beanie measures 4 inches tall for newborn or 4.5 inches for 1-3 months, then continue to brim.

Brim: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 35

Repeat Brim until the beanie measures 5 inches tall for newborn or 5.5 for 1-3 months. Fasten off and weave in any loose ends.

3-6 Months: (Circumference 15-16” and Height 6”) 

Round 6: Ch 1, 1 fphdc in same st, 1 hdc in next 4 sts, *1 hdc and 1 fphdc in next st, 1

hdc in next 4 sts, 1 fphdc in next st, 1 hdc next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 39

Round 7: Ch 1, 1 fphdc in same, 1 hdc in next 5 sts, *1 fphdc in next st, 1 hdc in next 4

sts, 1 fphdc in next st, 1 hdc in next 5 sts; repeat from*, join. - 39

Repeat Round 7 until the beanie measures 5 inches tall, then continue to brim.    Brim: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 39

Repeat Brim until the beanie measures 6 inches tall.

Fasten off and weave in any loose ends.

6-12 Months: (Circumference 16-18” and Height 6.5”) 

Round 6: Ch 1, 1 fphdc in same st, 1 hdc in next 4 sts, *1 hdc and 1 fphdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1hdc in same st as ch 1, join. - 42

Round 7: Ch 1, 1 fphdc in same, 1 hdc in next 5 sts, *1 fphdc in next st, 1 hdc in next 5

sts; repeat from*, join. - 42

Repeat Round 7 until the beanie measures 5.5 inches tall, then continue to brim.    Brim: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 42

Repeat Brim until the beanie measures 6.5 inches tall.

Fasten off and weave in any loose ends.



1-2 Years: (Circumference 18-20” and Height 7”) 

Round 6: Ch 1, 1 fphdc in same st, 1 hdc in next 4 sts, *1 hdc and 1 fphdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42

Round 7: Ch 1, 1 fphdc in same st, 1 hdc next 5 sts, *1 hdc and 1 fphdc in next st, 1 hdc in next 5 sts, 1 fphdc in next st, 1 hdc next 5 st; repeat from*, join. - 45

Round 8: Ch 1, 1 fphdc in same, *1 hdc in next 6 sts, 1 fphdc in next st, 1 hdc in next 5

sts, 1 fphdc in next st; repeat from*, until the last 5 sts, 1 hdc in last 5 sts, join. - 45 Repeat Round 8 until the beanie measures 6 inches tall, then continue to brim.

Brim: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 45

Repeat Brim until the beanie measures 7 inches tall.

Fasten off and weave in any loose ends.

3-10 Years: (Circumference 19-20” and Height 7.5”) 

Round 6: Ch 1, 1 fphdc in same st, 1 hdc in next 4 sts, *1 hdc and 1 fphdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42

Round 7: Ch 1, 1 fphdc in same st, 1 hdc in the next 5 sts, *1 hdc and 1 fphdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49 Round 8: Ch 1, 1 fphdc in same, 1 hdc in next 6 sts, *1 fphdc in next st, 1 hdc in next 6 sts; repeat from*, join. - 49

Repeat Round 8 until the beanie measures 6.5 inches tall, then continue to brim.    Brim: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 49

Repeat Brim until the beanie measures 7.5 inches tall.

Fasten off and weave in any loose ends.

Teen, Adult and Large Adult: (Circumference 22-23” and Height 7.5” Teen, 8” Adult and 8.5” Large Adult) Round 6: Ch 1, 1 fphdc in same st, 1 hdc in next 4 sts, *1 hdc and 1 fphdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42

Round 7: Ch 1, 1 fphdc in same st, 1 hdc in the next 5 sts, *1 hdc and 1 fphdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49 Round 8: Ch 1, 1 fphdc in same st, 1 hdc in next 6 sts, *1 hdc and 1 fphdc in next st, 1

hdc in next 6 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 56

Round 9: Ch 1, 1 fphdc in same, 1 hdc in next 7 sts, *1 fphdc in next st, 1 hdc in next 7 sts; repeat from*, join.  - 56

Repeat Round 9 until the beanie measures 6.5 inches tall for teen, 7 inches tall for adult or 7.5 inches tall for large adult, then continue to brim.

Brim: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 56

Repeat Brim until the beanie measures 7.5 inches tall for teen, 8 inches tall for adult or 8.5 inches tall for large adult.

Fasten off and weave in any loose ends.



 

Stump

You Need Your K Hook and Taupe Yarn

Make a Magic Ring,

Round 1: Ch 1, 7 sc in loop, join with a sl st in the 1st sc, pull tight. - 7

Round 2: Ch 1, 1 hdc in same st, 2 hdc in each st around, end with 1 hdc in same st as ch 1, join. - 14

Rounds 3 & 4: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 14 Round 5: Ch 1, 1 sc in same st, 1 hdc in next st, 1 dc in next st, ch 2 and sl st in 2nd ch from hook, 1 dc in next st, 1 hdc in next st, 1 sc in next 2 sts, 1 hdc in next st, 1 dc in next st, ch 2 and sl st in 2nd ch from hook, 1 dc in next st, 1 hdc in next , 1 sc in next 2 sts, 1 hdc in next st, 1 dc in same st as ch 1, ch 2 and sl st in 2nd ch from hook, join.

Fasten off and weave in any loose ends, leaving a long tail to sew the stump onto the center of beanie.  Optional: Stuff with fiber fill to help keep its round shape.

Curly Vine

You Need Your K Hook and Green Yarn

Ch 25 

Row 1: 2 hdc in 2nd ch from hook, 2 hdc in each ch across. - 48

Fasten off and weave in any loose ends, leaving a long tail to sew the vine onto the top of the beanie, (the vine may need to be rolled up).

Green Leaf

You Need Your H Hook and Green Yarn

Make a slip knot leaving a 10-inch tail - Chain 9 

Row 1: 1 sc in 2nd st from hook, 1 hdc in next st, 1 dc in next 3 sts, 1 hdc in next st, 1 sc in next st, sl st in next st.

You are now going to work on the other side of the base chain.

Row 2: Ch 1, sl st in next st, 1 sc in next st, 1 hdc in next st, 1 dc in next 3 sts, 1 hdc in next st, 1 sc in next st, sl st in next st.

Fasten off and weave in any loose ends, sew the side where you made the slip knot tail onto the beanie, sewing just the corner of the leaf onto beanie on top of the vine.

Flower

You Need Your H Hook and Your Two Yarn Colors of Choice

With Color A - Chain 4

Round 1: 1 dc in 4th ch from hook (3 skipped chs count as 1 dc), ch 1, *2 dc in same ch, ch 1; repeat from* 5 times, join with color B. - 12 dc

Round 2: Ch 5 (counts as 1 dc and ch 2), 2 dc in same st, ch 1, *(2 dc, ch 2, 2 dc) in next ch 1 sp, ch 1; repeat from* 5 times, end with 1 dc in same st as ch 5, join in the 3rd of 5

chs. - 24 dc

Round 3: Ch 3 (counts as 1 dc), 6 dc in 1st ch 2 sp, ch 1, *7 dc in next ch 2 sp, ch 1; repeat from* 5 times, join. - 42 dc

Fasten off and weave in any loose ends.  Optional, attach an alligator clip to the back of the flower to attach to the beanie.

Need more inspiration?

A fun textured blanket to make is the Oliver Blanket!  This blanket can be customized any way you like!

 

~Ashley

Categories