Sophia Beanie Crochet Pattern

Sophia Beanie Crochet Pattern

A simple beanie with a beautiful ribbed bottom, that is the Sophia Beanie! This beanie is fabulous in any color choice! You will enjoy crocheting this beanie!  The Sophia Beanie is worked using simple crochet stitches with one advanced crochet stitch, the front post. But, don't worry I will explain how to work that stitch.  So grab your yarn, hook and get ready to get hooked on the Sophia Beanie!

Disclaimer: This post contains affiliate links.



This beanie can be made for any age and as you see it looks fabulous in any shade!

Beanies that I Love!!

1.  Vintage Ripple Beanie   2. Morgan Beanie   3. Jelly Bean Beanie

The Sophia Beanie Crochet Pattern can be found in my pattern store as an ad free and beautifully formatted PDF.

Materials

  • Yarn: Medium, Weight 4; Your Color Choice. Sample is made with Vanna’s Choice (Aqua)
  • Hook: K (6.50mm)
  • Tapestry Needle, Scissors and Measuring Tape

Sizing

  • Gauge: 12 Stitches and 10 Rows = 4”x4” (hdc)
  • These measurements are approximated, measure head to get accurate sizing needed.

Pattern Key

  • St/Sts: Stitch(es)
  • Sl St: Slip Stitch
  • Ch: Chain
  • Sc: Single Crochet
  • Hdc: Half Double Crochet
  • Dc: Double Crochet

Special Stitches:

  • FPDC (Front Post Double Crochet): Yarn over, insert hook under post of stitch, yarn over & pull up a loop, yarn over, pull through 2 loops, yarn over, pull through last 2 loops.

Notes

  • Chain 1 will NOT count as a stitch.
  • Joining: When ending the rounds, you will join with a slip stitch into the 1st stitch (not the chain 1).

Sophia Beanie Crochet Pattern

ALL SIZES: (0-3M, 3-6M, 6-12M, 1-2Y, 3-10Y, Teen, Adult and Large Adult) You Need Your K Hook and Your Color Choice of Yarn.

Make a Magic Ring,

Round 1: Ch 1, 7 sc in loop, join with a sl st in the 1st sc, pull tight. - 7

Round 2: Ch 1, 1 hdc in same st, 2 hdc in each st around, end with 1 hdc in same st as ch 1, join. - 14

Round 3: Ch 1, 1 hdc in same st, 1 hdc in next st, *2 hdc in next st, 1 hdc in next st; repeat from*, end with 1 hdc in same st as ch 1, join. - 21

Round 4: Ch 1, 1 hdc in same st, 1 hdc in next 2 sts, *2 hdc in next st, 1 hdc in next 2 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 28

Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35

CONTINUE TO THE SECTION OF THE SIZE YOU ARE MAKING

0-3 Months: (Circumference 13-14” and Height 5 - 5.5”)

Round 6: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, end with 1 hdc in same st as ch 1, join. - 36

Round 7: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 36

Repeat Round 7 until the beanie measures 3.5 inches tall for newborn or 4 inches tall for 1-3 months, then continue to Ribbed Bottom.

Ribbed Bottom:

Round 1: Ch 1, 1 dc in same st, 1 fpdc in next st, *1 dc in next st, 1 fpdc in next st; repeat from*, join. - 36

Repeat Round 1 until the beanie measures 5 inches tall for newborn or 5.5 inches tall for 1-3 months. Fasten off and weave in any loose ends.

3-6 Months: (Circumference 15-16” and Height 6”)

Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 7 sts, *2 hdc in next st, 1 hdc in next 8 sts; repeat from*, join. - 38

Round 7: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 38

Repeat Round 7 until the beanie measures 4.5 inches tall, then continue to Ribbed Bottom.

Ribbed Bottom:

Round 1: Ch 1, 1 dc in same st, 1 fpdc in next st, *1 dc in next st, 1 fpdc in next st; repeat from*, join. - 38

Repeat Round 1 until the beanie measures 6 inches tall.

Fasten off and weave in any loose ends.


6-12 Months: (Circumference 16-18” and Height 6.5”) 

Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42

Round 7: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 42

Repeat Round 7 until the beanie measures 5 inches tall, then continue to Ribbed Bottom.

Ribbed Bottom:

Round 1: Ch 1, 1 dc in same st, 1 fpdc in next st, *1 dc in next st, 1 fpdc in next st; repeat from*, join. - 42

Repeat Round 1 until the beanie measures 6.5 inches tall.

Fasten off and weave in any loose ends.

1-2 Years: (Circumference 18-20” and Height 7”) 

Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42

Round 7: Ch 1, 1 hdc in same st, 1 hdc next st, *2 hdc in next st, 1 hdc in next 19 sts; repeat from*, join. - 44

Round 8: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 44

Repeat Round 8 until the beanie measures 5.5 inches tall, then continue to Ribbed Bottom.

Ribbed Bottom:

Round 1: Ch 1, 1 dc in same st, 1 fpdc in next st, *1 dc in next st, 1 fpdc in next st; repeat from*, join. - 44

Repeat Round 1 until the beanie measures 7 inches tall.

Fasten off and weave in any loose ends.

3-10 Years: (Circumference 19-20” and Height 7.5”) 

Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42

Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, join. - 48

Round 8: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 48

Repeat Round 8 until the beanie measures 6 inches tall, then continue to Ribbed Bottom.

Ribbed Bottom:

Round 1: Ch 1, 1 dc in same st, 1 fpdc in next st, *1 dc in next st, 1 fpdc in next st; repeat from*, join. - 48

Repeat Round 1 until the beanie measures 7.5 inches tall.

Fasten off and weave in any loose ends.

Teen, Adult and Large Adult: (Circumference 22-23” and Height 7.5” Teen, 8” Adult and 8.5” Large Adult) 

Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42

Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49

Round 8: Ch 1, 1 hdc in same st, 1 hdc in next 6 sts, *2 hdc in next st, 1 hdc in next 6 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 56

Round 9: Ch 1, 1 hdc in same st, 1 hdc in next st and each st around, join. - 56

Repeat Round 9 until the beanie measures 6 inches tall for teen, 6.5 inches tall for adult or 7 inches tall for large adult, then continue to Ribbed Bottom.

Ribbed Bottom:

Round 1: Ch 1, 1 dc in same st, 1 fpdc in next st, *1 dc in next st, 1 fpdc in next st; repeat from*, join. - 56

Repeat Round 1 until the beanie measures 7.5 inches tall for teen, 8 inches tall for adult or 8.5 inches tall for large adult. Fasten off and weave in any loose ends.

 

Need more inspiration?

A fun textured blanket to make is the Oliver Blanket!  This blanket can be customized any way you like!

 

~Ashley

 

Categories

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods