I love making beanies, they are great projects to make and the ideas are endless! When you make the Sugar Twist Beanie it is going to work up even quicker than an average beanie because this beanie has rounds that have treble crochet stitches and 1 round of those stitches are about 1" tall, so you get this beautiful beanie super duper quick! Plus, I think the treble crochet stitch is fun to make too! If you are looking for a lighter weight beanie to make that works up super quick, then grab your hooks and give the Sugar Twist Beanie a try!
Disclaimer: This post contains affiliate links.
Get ready to get hooked on the Sugar Twist Beanie!
Beanies that I Love!!
1. Vintage Ripple Beanie 2. Morgan Beanie 3. Jelly Bean Beanie
The Sugar Twist Beanie Crochet Pattern can be found in my pattern store as an ad free and beautifully formatted PDF.
- Get the ad-free, beautifully formatted, printable PDF from Ravelry.
- PIN the pattern to save for later on your Pinterest Boards Here!
[embed]https://youtu.be/sOZM2fcMKFE[/embed]
Materials
- Yarn: Medium, Weight 4; Your Color Choice. Sample is made Vanna’s Choice (Berrylicious)
- Hook: K (6.50mm)
- Tapestry Needle, Scissors and Measuring Tape
Sizing
- Gauge: 12 Stitches and 10 Rows = 4”x4” (hdc)
Pattern Key
- St/Sts: Stitch(es)
- Sl St: Slip Stitch
- Ch: Chain
- Sc: Single Crochet
- Hdc: Half Double Crochet
Special Stitches
- Tr: Treble - Yarn over twice, insert hook into stitch. Yarn over and pull through two loops, yarn over and pull through next two loops, yarn over and pull through last two loops.
[embed]https://youtu.be/fiPRh_sGIug[/embed]
Notes
- Chain 1 will NOT count as a stitch.
- Joining: When ending the rounds, you will join with a slip stitch into the 1st stitch (not the chain 1).
ALL SIZES: (0-3M, 3-6M, 6-12M, 1-2Y, 3-10Y, Teen, Adult and Large Adult)
You Need Your K Hook and Your Color Choice of Yarn.
Make a Magic Ring,
Round 1: Ch 1, 7 sc in loop, join with a sl st in the 1st sc, pull tight. - 7
Round 2: Ch 1, 1 hdc in same st, 2 hdc in each st around, end with 1 hdc in same st as ch 1, join. - 14
Round 3: Ch 1, 1 hdc in same st, 1 hdc in next st, *2 hdc in next st, 1 hdc in next st; repeat from*, end with 1 hdc in same st as ch 1, join. - 21
Round 4: Ch 1, 1 hdc in same st, 1 hdc in next 2 sts, *2 hdc in next st, 1 hdc in next 2 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 28
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35
CONTINUE TO THE SECTION OF THE SIZE YOU ARE MAKING
0-3 Months: (Circumference 13-14” and Height 5 - 5.5”)
Round 6: Ch 1, 1 tr in same st, 1 tr in next st and each st around, join. - 35
Repeat Round 6 until the beanie measures 4.5 inches tall for newborn or 5 inches tall for 1-3 months, then continue to brim.
Brim – Round 1 & 2: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 35
Fasten off and weave in any loose ends.
3-6 Months: (Circumference 15-16” and Height 6”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 7 sts, *2 hdc in next st, 1 hdc in next 8 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 39
Round 7: Ch 1, 1 tr in same st, 1 tr in next st and each st around, join. - 39
Repeat Round 7 until the beanie measures 5.5 inches tall, then continue to brim.
Brim – Round 1 & 2: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 39
Fasten off and weave in any loose ends.
6-12 Months: (Circumference 16-18” and Height 6.5”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 tr in same st, 1 tr in next st and each st around, join. - 42
Repeat Round 7 until the beanie measures 6 inches tall, then continue to brim.
Brim – Round 1 & 2: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 42
Fasten off and weave in any loose ends.
1-2 Years: (Circumference 18-20” and Height 7”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc next st, *2 hdc in next st, 1 hdc in next 19 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 45
Round 8: Ch 1, 1 tr in same st, 1 tr in next st and each st around, join. - 45
Repeat Round 8 until the beanie measures 6.5 inches tall, then continue to brim.
Brim – Round 1 & 2: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 45
Fasten off and weave in any loose ends.
3-10 Years: (Circumference 19-20” and Height 7.5”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49
Round 8: Ch 1, 1 tr in same st, 1 tr in next st and each st around, join. - 49
Repeat Round 8 until the beanie measures 7 inches tall, then continue to brim.
Brim – Round 1 & 2: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 49
Fasten off and weave in any loose ends.
Teen, Adult and Large Adult: (Circumference 22-23” and Height 7.5” Teen, 8” Adult and 8.5” Large Adult)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49
Round 8: Ch 1, 1 hdc in same st, 1 hdc in next 6 sts, *2 hdc in next st, 1 hdc in next 6 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 56
Round 9: Ch 1, 1 tr in same st, 1 tr in next st and each st around, join. - 56
Repeat Round 9 until the beanie measures 7 inches tall for teen, 7.5 inches tall for adult or 8 inches tall for large adult, then continue to brim.
Brim – Round 1 & 2: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 56
Fasten off and weave in any loose ends.
If you are looking to try another project with treble crochet stitches, you can try the beautiful Katy Cowl from Divine Debris on All Free Crochet.
"This super easy pattern features a simple to follow repetition of treble crochet, half double crochet and slip stitches. Once you get the pattern down, you're going to able to customize this into a long infinity scarf or a tight cozy stocking scarf in no time. In fact, the pattern features two versions for those who prefer to work in the round."
So grab your hooks and get to crochet some projects with the treble crochet stitch!
~Ashley
