
The Sweetheart Beanie creates adorable little hearts within the beanie and it is fun to make too! Are you ready to challenge your crochet skills? Then you must try the Sweetheart Beanie, the color combinations are endless! I made this beanie with an aqua shade and can be universal for everyone to wear! Grab your favorite shade of yarn, hook and get ready to get hooked!
Disclaimer: This post contains affiliate links.
Beanies that I Love!!
1. Vintage Ripple Beanie 2. Morgan Beanie 3. Jelly Bean Beanie
The Sweetheart Beanie Crochet Pattern can be found in my pattern store as an ad free and beautifully formatted PDF.
- Get the ad-free, beautifully formatted, printable PDF from Ravelry.
- PIN the pattern to save for later on your Pinterest Boards Here!
Materials
- Yarn: Medium, Weight 4; Your Color Choice. Sample is made with Vanna’s Choice (Aqua)
- Hook: K (6.50mm)
- Tapestry Needle, Scissors and Measuring Tape
Sizing
- Gauge: 12 Stitches and 10 Rows = 4”x4” (hdc)
- These measurements are approximated, measure head to get accurate sizing needed.
Pattern Key
- St/Sts: Stitch(es)
- Sl St: Slip Stitch
- Ch: Chain
- Sc: Single Crochet
- Hdc: Half Double Crochet
- Dc: Double Crochet
Special Stitches:
- FPDC (Front Post Double Crochet): Yarn over, insert hook under post of stitch, yarn over & pull up a loop, yarn over, pull through 2 loops, yarn over, pull through last 2 loops.
Notes
- Chain 1 will NOT count as a stitch.
- Joining: When ending the rounds, you will join with a slip stitch into the 1st stitch (not the chain 1).
ALL SIZES: (0-3M, 3-6M, 6-12M, 1-2Y, 3-10Y, Teen, Adult and Large Adult) You Need Your K Hook and Your Color Choice of Yarn.
Make a Magic Ring,
Round 1: Ch 1, 7 sc in loop, join with a sl st in the 1st sc, pull tight. - 7
Round 2: Ch 1, 1 hdc in same st, 2 hdc in each st around, end with 1 hdc in same st as ch 1, join. - 14
Round 3: Ch 1, 1 hdc in same st, 1 hdc in next st, *2 hdc in next st, 1 hdc in next st; repeat from*, end with 1 hdc in same st as ch 1, join. - 21
Round 4: Ch 1, 1 hdc in same st, 1 hdc in next 2 sts, *2 hdc in next st, 1 hdc in next 2 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 28
Round 5: Ch 1, 1 hdc in same st, 1 hdc in next 3 sts, *2 hdc in next st, 1 hdc in next 3 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 35
CONTINUE TO THE SECTION OF THE SIZE YOU ARE MAKING
0-3 Months: (Circumference 13-14” and Height 5 - 5.5”)
Round 6: Ch 1, 1 sc in same st, 1 sc in next st and each st around, end with 1 sc in same st as ch 1, join. - 36
Round 7: Ch 1, 1 dc in same st, 1 fpdc around the post of the dc just made, skip the next st, *1 dc in next st, 1 fpdc around the post of the dc just made, skip next st; repeat from*, join. - 36
Round 8: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 36
Repeat Rounds 7 & 8 until the beanie measures 4 inches tall for newborn or 4.5 inches tall for 1-3 months, ending on round 7, then continue to brim.
Brim: Rounds 1-3: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 36 Fasten off and weave in any loose ends.
3-6 Months: (Circumference 15-16” and Height 6”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 7 sts, *2 hdc in next st, 1 hdc in next 8 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 39
Round 7: Ch 1, 1 sc in same st, 1 sc in next st and each st around, end with 1 sc in same st as ch 1, join. - 40
Round 8: Ch 1, 1 dc in same st, 1 fpdc around the post of the dc just made, skip the next st, *1 dc in next st, 1 fpdc around the post of the dc just made, skip next st; repeat from*, join. - 40
Round 9: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 40
Repeat Rounds 8 & 9 until the beanie measures 5.5 inches tall, ending on round 8, then continue to brim.
Brim: Rounds 1-3: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 40 Fasten off and weave in any loose ends.
6-12 Months: (Circumference 16-18” and Height 6.5”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, join. - 41
Round 7: Ch 1, 1 sc in same st, 1 sc in next st and each st around, end with 1 sc in same st as ch 1, join. - 42
Round 8: Ch 1, 1 dc in same st, 1 fpdc around the post of the dc just made, skip the next st, *1 dc in next st, 1 fpdc around the post of the dc just made, skip next st; repeat from*, join. - 42
Round 9: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 42
Repeat Rounds 8 & 9 until the beanie measures 6 inches tall, ending on round 8, then continue to brim.
Brim: Rounds 1-3: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 42 Fasten off and weave in any loose ends.
1-2 Years: (Circumference 18-20” and Height 7”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc next st, *2 hdc in next st, 1 hdc in next 19 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 45
Round 8: Ch 1, 1 sc in same st, 1 sc in next st and each st around, end with 1 sc in same st as ch 1, join. - 46
Round 9: Ch 1, 1 dc in same st, 1 fpdc around the post of the dc just made, skip the next st, *1 dc in next st, 1 fpdc around the post of the dc just made, skip next st; repeat from*, join. - 46
Round 10: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 46
Repeat Rounds 9 & 10 until the beanie measures 6.5 inches tall, ending on round 9, then continue to brim.
Brim: Rounds 1-3: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 46 Fasten off and weave in any loose ends.
3-10 Years: (Circumference 19-20” and Height 7.5”)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49
Round 8: Ch 1, 1 sc in same st, 1 sc in next st and each st around, end with 1 sc in same st as ch 1, join. - 50
Round 9: Ch 1, 1 dc in same st, 1 fpdc around the post of the dc just made, skip the next st, *1 dc in next st, 1 fpdc around the post of the dc just made, skip next st; repeat from*, join. - 50
Round 10: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 50
Repeat Rounds 9 & 10 until the beanie measures 7 inches tall, ending on round 9, then continue to brim.
Brim: Rounds 1-3: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 50 Fasten off and weave in any loose ends.
Teen, Adult and Large Adult: (Circumference 22-23” and Height 7.5” Teen, 8” Adult and 8.5” Large Adult)
Round 6: Ch 1, 1 hdc in same st, 1 hdc in next 4 sts, *2 hdc in next st, 1 hdc in next 4 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 42
Round 7: Ch 1, 1 hdc in same st, 1 hdc in the next 5 sts, *2 hdc in the next st, 1 hdc in next 5 sts; repeat from*, end with 1 hdc in same st as ch 1, join. - 49
Round 8: Ch 1, 2 hdc in same st, 1 hdc in next 13 sts, *2 hdc in next st, 1 hdc in next 6 sts; repeat from*, join. - 55
Round 9: Ch 1, 1 sc in same st, 1 sc in next st and each st around, end with 1 sc in same st as ch 1, join. - 56
Round 10: Ch 1, 1 dc in same st, 1 fpdc around the post of the dc just made, skip the next st, *1 dc in next st, 1 fpdc around the post of the dc just made, skip next st; repeat from*, join. - 56
Round 11: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 56
Repeat Rounds 10 & 11 until the beanie measures 7 inches tall for a teen, 7.5 inches tall for an adult or 8 inches tall for a large adult, ending on round 10, then continue to brim. Brim: Rounds 1-3: Ch 1, 1 sc in same st, 1 sc in next st and each st around, join. - 56 Fasten off and weave in any loose ends.
Need more inspiration?
A fun textured blanket to make is the Oliver Blanket! This blanket can be customized any way you like!
~Ashley